How to mark the grid marking method in the logo standard drawing?
The grid marking method in logo drawing is a common design marking method, which is used to clearly identify the location and size of each element in the grid. The following is a detailed description of how to correctly label grids in Logo specification drawings.
First, we should understand the basic elements of the logo specification drawing, such as: Points, lines, faces, and regions. They form the core structure of the design, and each element carries a specific meaning and symbolism. For example, a circle may represent the philosophy of an organization or company, and a straight line may represent the core values of a brand.
We then need to use grids in the specification drawing to clearly identify these elements. The procedure is as follows:：
Set the size and spacing of the mesh: This determines the overall scale and layout of the design. In general, the side length of the mesh should be consistent with the major proportions of the design, such as the golden ratio, the length-to-width ratio, and so on.
Marking point: If there are important points in the design, such as the brand's core values or important design ideas, the locations of these points should be accurately identified using grid lines. For example, a center point of a circle or the intersection of a key line.
Marking line: If lines are required in your design to guide the line of sight or to express a sense, the location and orientation of these lines should be indicated on the grid. For example, a path leading the line of sight or a boundary line for a key element.
Marked area: If there are areas in the design that need to be highlighted, such as the area where the brand logo is located, the boundaries and sizes of these areas should be indicated on the grid. For example, a rectangular or circular area in which a logo is located.
Sign Symmetry: If symmetry exists in the design, such as a symmetrical sign or pattern, the location and orientation of the axis of symmetry should be indicated on the grid.
Finally, it is important to note that,Logo DesignThe grid marking method in normative drawings should be clear, accurate and easy to understand. This not only helps designers better understand and express design intent, but also helps customers and team members better understand and use the design.
